3.75V 14Ah 1833 LMFP Battery Cell

1833 serial lithium ion cell is the prismatic aluminum case lithium batteries that use lithium manganese phosphate (LMFP) / lithium manganese (LMO) material with lamination production process. The battery cell is a power battery, supporting continuous 1C charging and 3C discharge. The cycle life exceeds 2,000 times. It has normal voltage by 3.75V, meanwhile obtain much high safety performance than NCM cells, supporting nail penetration test. It has been widely used in electric 2-wheeler lithium ion battery.

14
Nominal Capacity(Ah)

3.75
Nominal voltage(V)

2000
Nominal Cycles(times)

264
Energy density (Wh/kg)

325
MaxWeight (g)

≤20
AC internal resistance (mΩ)

Application

light electric vehicles(E2W, E3W, low speed E4W), forklift pallet, various lights, consumer robots, etc

Product Certification

Fast Quotation

Cell Categories

About This Produt

Product Specification

  • Model: 1833-12Ah
  • Product Dimensions: 18x66x133mm
  • Cathode Material: LFMP / LMO
  • Weight: 325g
  • Nominal Voltage: 3.75V
  • Nominal Capacity: 14Ah
  • Cut-off Discharge Voltage: 2.7V
  • Maximum Charge Voltage: 4.2V
  • Maximum Discharge Rate: 3C
  • Charging Method: CC/CV
  • Cycle Life: ≥2000
  • Operating Temperature: Charging 0°C to 55°C; Discharging -20°C to 60°C

Product Details

  • High safety performance: It is the classic lithium ion cell used in 2-wheeler electric vehicle battery in the past 15 years in China. Also it has been upgraded year by year. Safety tests including short circuit, over charge,even nail penetration can pass.
  • High voltage platform: With lithium manganese phosphate (LFMP) / lithium manganese (LMO) technology, nominal voltage is 3.75V, even higher than NCM technology.
  • Declining voltage curve: Different from the LFP battery, it has a declining voltage curve, similar as NCM or lead acid battery, which makes it very simple on SOC calculation.
  • High power: Contentious 1C for charging and 3C for discharging are supported, which is benefited from the foil plates lamination production process.
  • Easy assembly: Spot welding or laser welding on cell terminals are both OK, easy to handle.

Product Appliaction

Warranty Policy

We stand behind our Grade A claims and know you will be more than satisfied with the product you receive. We offer a 30 Day no hassle, MONEYBACK GUARANTEE if you are unsatisfied with your cells for ANY reason. You will be responsible for the return shipping fees unless product is determined to be faulty.

We offer a 1 year warranty on all battery cell. We offer technical support and troubleshooting throughout the duration of the warranty. We can offer greater than a 1 year warranty on the cells but you will need to contact us with your design specs for approval. Large orders of 1,000pcs+ minimum.

Warranties only apply to original owner and are non-transferrable. We will verify your purchase prior to processing any warranty claims or returns.

If it is determined that our product is obviously faulty, we will ship new product to you immediately. We will cover the cost of return shipping.  This does not apply to items that have been damaged due to gross negligence, normal wear & tear, improper installation or abuse.

Our warranty does not cover items that have been damaged due to gross negligence, improper installation or abuse. If you are unsure, you should contact us before installing the product.

FAQ

The 37101 LiFePO4 battery cell is suitable for energy storage systems, electric vehicles (such as electric forklifts, electric trucks), high-power UPS equipment, and solar energy storage systems. Its large capacity and long life characteristics make it an ideal choice for scenarios with high energy density requirements.

  • Nominal voltage: 3.2V
  • Capacity: 60Ah
  • Size: standard size, suitable for large-capacity assembly
  • Discharge rate: supports 3C continuous discharge, instantaneous discharge can reach 5C
  • Cycle life: more than 3000 charge and discharge cycles
  • Operating temperature range: -20°C to 60°C

Depending on the application requirements, the battery pack can be assembled in the following ways:

  • Series connection: Increase the total voltage, for example, 16 strings can form a 51.2V system for energy storage applications
  • Parallel connection: Increase the total capacity, for example, 4 and form a 240Ah capacity, suitable for long-term backup power needs

Assembly requires high-performance BMS and precise connection process to ensure safety and reliability.

Yes, the 37101 battery supports 3C continuous discharge and 5C instantaneous discharge, which can meet the start-up and operation requirements of high-power equipment such as electric trucks.

Yes, the BMS is a necessary component for battery pack assembly. It can monitor the status of each battery cell in real time (such as voltage, temperature and current), provide safety protection (such as overcharge, over discharge, over temperature protection), and extend the service life of the battery pack.

Yes, this battery cell is optimized to support a wide operating temperature range of -20°C to 60°C. For extremely cold environments as low as -40°C, we can provide customized heating system solutions.

  • UN38.3: Meets international transportation safety requirements
  • CE: Meets EU market requirements
  • UL: Meets international safety standards
  • IEC62619: Battery safety certification suitable for energy storage and industrial applications

Yes, we provide comprehensive customization services, including:

  • Voltage and capacity adjustment (such as 51.2V 300Ah battery pack)
  • Waterproof and dustproof housing design, suitable for use in harsh environments
  • Intelligent BMS system integration, providing real-time data monitoring and remote management functions
  • Check the BMS status regularly to ensure the balance of the battery cells
  • Avoid deep discharge, it is recommended to keep the power range of 50%-60%
  • When stored for a long time, recharge the battery once every three months
  • The storage environment should be kept dry and the temperature range should be between -10°C and 30°C.

Under normal use conditions, this battery can provide more than 3,000 charge and discharge cycles, and the battery pack can last for more than 5 years.

Yes. The maximum charge rate of this battery is 1C (60A), which can complete charging in a short time, significantly improving efficiency.

This battery supports deep discharge and efficient charging characteristics, and can efficiently store and release energy between day and night, making it an ideal choice for home and commercial energy storage systems.

Yes, its standardized shape and high consistency performance are very suitable for modular design, which can be easily expanded to higher voltage or capacity.

This battery maintains stable performance in high temperature environment, and its safety of use is further optimized through heat dissipation design, which is suitable for industrial and outdoor equipment.

Usually, the minimum order quantity is 50 pieces. If a customized battery pack is required, it can be adjusted according to the requirements.

  • Yes, we provide comprehensive technical support, including:
  • Battery pack design and configuration consultation
  • BMS system selection and commissioning support
  • Technical guidance and after-sales support during assembly

During the assembly process, high-quality connection technology, suitable BMS, and sufficient safety tests (such as overcharge, over-discharge, and short-circuit tests) must be used to ensure the safety and reliability of the final product.

Other Battery Cell